Safety; Intended Use Of The Machine; Prohibited Applications / Hazardous Misapplications; User Requirements - Zipper Maschinen ZI-BHS605 Manual Del Usuario

13

SAFETY

This section contains information and important notes on safe commissioning and handling of the
machine.
For your safety, please read these operating instructions carefully before start-up.
This will enable you to handle the machine safely and prevent misunderstandings as
well as personal injury and damage to property. Also observe the symbols and
pictograms used on the machine as well as the safety and hazard information!

13.1 Intended Use of the Machine

The machine is intended exclusively for the following activities: For cutting shrubs, bushes,
bushes and hedges within the specified technical limits.
ZIPPER-MASCHINEN
and for any resulting damage to property or injury.

13.1.1 Prohibited Applications / Hazardous Misapplications

- Operating the machine without adequate physical and mental fitness.
- Operating the machine without knowledge of the operating manual of the machine /
engine.
- Changes to the design of the machine.
- Operating the machine in a potentially explosive environment.
- Operating the machine indoors or in closed areas.
- Operating the machine without functioning or missing protection devices.
- Remove the safety signs attached to the machine.
- Modify, circumvent or disable the safety devices of the machine.
Improper use or disregard of the explanations and instructions given in this manual will result in
the expiration of all warranty and compensation claims against Zipper Maschinen GmbH.

13.2 User Requirements

The machine is designed to be operated by one person. The physical and mental suitability as
well as knowledge and understanding of the operating instructions are prerequisites for operating
the machine.
Please note that local laws and regulations may determine the minimum age of the
operator and restrict the use of this machine!
Put on personal protective equipment before starting work with/on the machine.

13.3 General Safety Instructions

To avoid malfunctions, damage and health hazards when working with the machine, in addition to
the general rules for safe working, the following points in particular must be observed:
 Check that the machine is in perfect condition before each use. Ensure that all guards are
in place and working properly and that all nuts, bolts, etc. are securely tightened.
 Ensure sufficient lighting conditions in the working and surrounding areas of the machine.
 Always ensure a safe working position.
 Remove setting tools from the machine before starting.
 Never leave the running machine unattended.
 Ensure that unauthorised persons maintain in safe distance from the machine and keep
children away from the machine in particular.
 The machine may only be operated, serviced or repaired by persons who are familiar with
it and who have been informed of the dangers arising during this work.
 Always wear suitable personal protective equipment (eye protection, ear protection, face
protection, working gloves, safety shoes, tight-fitting protective clothing, etc.)!
 Do not work on the machine if you are tired, not concentrated or under the influence of
medication, alcohol or other drugs!
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-BHS605
accepts no responsibility or warranty for any other use or use beyond this
SAFETY
18