Publicidad
Section 4
Install Wiper Arm (cont.)
Step 3
Step 3
Position the wiper arm so that the
wiper blade is angled slightly up and
to the right.
Lift the cover over the wiper arm
output shaft fitting, and using the
2.5mm allen wrench, tighten the arm
on the output shaft.
P10 - 54858 - Rev. B 0515
2.5mm
Allen Wrench
Installation Instructions - Trektop PRO Rear Window Wiper Kit
X
√
Page 10
Step 4
#2 Phillips
Screwdriver
Step 4
Adjust the angle of the wiper blade by
loosening the Phillips screw and
rotating the blade.
Align the wiper blade with the top
edge of the glass.
After adjustment, tighten all fasteners.
© 2015 Bestop, Inc.
Publicidad
