Publicidad
Section 3
Install Wiper Motor into Rear Glass (cont.)
Step 3
#2 Phillips
Screwdriver
Step 3
From the inside of the glass, place
one of the inner isolators (#513.03)
between the wiper motor and the
glass, making sure to align it with the
cutout area in the gasket.
Push the #10 screw the rest of the
way through the wiper motor flange,
and attach the #10 Nylock nut and
#10 washer.
Do not tighten the nut at this point.
P7 - 54858 - Rev. B 0515
Hardware
3/8"
Wrench
Inner Isolator
Qty. 2
Part # 513.03
Outer Isolator
Qty. 1
Part # 510.03
Installation Instructions - Trektop PRO Rear Window Wiper Kit
Washer Coupler
and Nut
Qty. 1
Part # 514.67
#10-32
Nylock Nut
Qty. 1
Part # 316.94
#10 Washer
Qty. 1
Part # 514.63
Page 7
Step 4
Step 4
Insert outer isolator into top hole in
glass, then insert washer coupler into
outer isolator.
© 2015 Bestop, Inc.
Publicidad
