Publicidad
Section 1
Remove Wiper Motor Hardware; Install Wiring Harness
Step 1
512.61
Step 1
Remove nut, cupped washer, and rubber
washer from wiper motor shaft and set
aside.
P4 - 54858 - Rev. B 0515
Red
Blue
Black
Installation Instructions - Trektop PRO Rear Window Wiper Kit
Hardware
Red
Blue
Black
Wiring Harness
Qty. 1
Part # 512.65
Step 2
512.65
Step 2
Push wire harness connectors onto
terminals. Match wire color to terminal color.
Step 3
Fold down all three terminals and
connectors so that they are below the top
surface of the wiper motor.
Page 4
© 2015 Bestop, Inc.
Publicidad
