How To Use; Cleaning Mode; Language Setup - Dreame V11 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 35

How to Use

Function Introduction of Display Screen
Note: If you need to pay attention to any abnormality during the use of the product,
the screen will push a prompt message. You should follow the instructions on the
screen to keep the performance normal.

Language Setup

You may set the display prompt language (Simplified English is the default when you
start the machine) by the following methods as you need.
a.Press
language selection interface
b.Click
select the appropriate language
c.Press
setting setting.
Note: If there is no operation for more than 5 seconds, it will automatically exit from
the language setting interface, and the display information will be off.
6
Electronic Lock / Reset Filter
·Click to switch to Working Mode
·Press and hold for 1.5 seconds to enter the
filter reset interface
Battery level monitor ring
·Blue: Battery level is more than 20%
·Red: Battery level is less than 20%
Gear switch / Language setup
·Click to switch to Eco Mode, Med Mode and
Turbo Mode
·Press and hold for 3 seconds to enter the
language setting interface
and hold for 3 seconds to enter the
to scroll through the language list, and
and hold for 3 seconds to save your
How to Use

Cleaning Mode

There are two working modes for the vacuum cleaner, which can be selected
according to your own needs.
Mode 1: Discontinuous Cleaning Mode
Press and hold the switch of the vacuum cleaner to start working, and release it to
stop immediately.
Mode 2: Continuous Cleaning Mode (Electronic lock)
In standby mode, click the electronic lock key to switch to Continuous Cleaning
Mode, and then briefly press the switch to make the vacuum cleaner in Continuous
Cleaning Mode.
Use the electronic lock to free your finger and avoid finger fatigue caused by holding
the switch.
Note:
• In this mode, briefly press the switch to suspend the operation or start again, and
the working mode of the vacuum cleaner will not change.
• Click the electronic lock again to quit the Continuous Cleaning Mode.
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

T30T20T10

Tabla de contenido