How To Use - Dreame Robot Vacuum-Mop F9 Manual De Instrucciones

How to Use

1. Turn On/Off
Press and hold the button to turn on the vacuum-mop. Once the power
indicator turns solid white, the vacuum-mop is in standby mode. To turn off
the vacuum-mop, press and hold the button
stationary. Turning off the vacuum-mop will end the current cleaning task.
2. Start Cleaning
Upon activation, the vacuum-mop will methodically clean each room in an
S-shape pattern, then finish by cleaning along edges and walls to ensure a
thorough job. When the vacuum-mop is done cleaning, it will automatically
return to the charging dock to recharge.
Note:
• Please fully charge and start from the charging dock before cleaning. Don't move the
robot and charging dock when the robot is working.
• If the battery is too low , the robot will automatically return to the dock to charge. It
will resume unfinished cleaning tasks after charging to the appropriate power.
while the vacuum-mop is
3. Cleaning Mode
Four cleaning modes are available in the app:
Quiet, Standard, Strong and Turbo. The default mode is Standard.
4. Pausing/Sleep Mode
Press any button to pause the vacuum-mop during cleaning.
•
The vacuum-mop will automatically enter sleep mode after 10 minutes of
•
inactivity, then the power and charging indicators will go off. To wake up
the vacuum-mop, press any button.
Note: When the vacuum-mop is paused, placing it onto the charging dock will end the
current cleaning task.
5. Spot Clean mode
When the vacuum-mop is in standby mode or paused, press and hold the
button for 3 seconds to start Spot Clean mode. In this mode, it will clean
a square-shaped area of 1.5 ×1.5 meters directly around the vacuum-mop.
When the spot cleaning is done, the vacuum-mop will automatically return
to its original location and shut off.
Note: Activating Spot Clean mode will end the current cleaning task of the vacuum-mop.
9