Auto-Calibration - CP Desoutter FAS 3000 Manual Del Usuario

FAS 3000 FLOW CHART

AUTO-CALIBRATION

Auto-Calibration allows the operator to record the signature of a properly tightened fastener by which to qualify
succeeding fasteners. On the FAS3000, the process will be performed as follows:
Indicates the parameter set that will be
calibrated, i.e. parameter set A.
These statements will repeat until the proper
button is pressed to continue to the next step.
Press this key any time to exit the Auto-
Cal process.
Part no 2050479303
Issue no 02
Series no -
Date 12/2006
Page 7 / 218
or