Install The Header Bracket - Craftsman 139.53965SRT Manual Del Propietário

INSTALLATION STEP 2
Install the Header Bracket
You can attach the header bracket either to the wall
above the garage door, or to the ceiling. Follow the
instructions which will work best for your particular
requirements. Do not install the header bracket
over drywall. If installing into masonry, use
concrete anchors (not provided).
WALL HEADER BRACKET INSTALLATION
• Center the bracket on the vertical centerline with
the bottom edge of the bracket on the horizontal
line as shown (with the arrow pointing toward the
ceiling).
• Mark the vertical set of bracket holes. Drill 3/16"
pilot holes and fasten the bracket securely to a
structural support with the hardware provided.
HARDWARE SHOWN ACTUAL SIZE
1111111111
Lag Screw
5/16"-9xl -5/8"
Wall Mounting Holes
_j_ The nail hole is for
positioning only.
Y°UmUn_tti_seh lagdscrt_ws ket.
Wall Mounting Holes
Highest Point of
Garage Door Travel
Vertical
Centerline
L rw
agSce s
_ _. 5/16"x9x1-5/8"
Ooor or,oo
I f Garage
.._ - Door-
I_ Vertical
I I
Centerline
i
CEILING HEADER BRACKET INSTALLATION
• Extend the vertical centerline onto the ceiling as
shown.
• Center the bracket on the vertical mark, no more
than 6" from the wall. Make sure the arrow is
pointing toward the wall. The bracket can be
mounted flush against the ceiling when clearance
is minimal.
• Mark the side holes. Drill 3/16" pilot holes and
fasten bracket securely to a structural support with
the hardware provided.
Ceiling Mounting Holes
/%
/ \
The tnan=l hglenl_ f° r _ _ _
- Header Wall -
14