Maintenance In struc tions.
NOTE: Left and right describes the location of a part with the operator
facing the outlet panel.
UNPACKING
1.
Open carton from top.
2.
Cut carton along dotted lines.
3.
Remove all carton inserts.
4.
See portability Kit instructions to assemble the portability kit.
ASSEMBLE PORTABLILITY KIT
Tools needed:
1 - 1/2" socket
1 - 1/2" open end wrench
1 - 3/8" socket
1 - 3/8" open end wrench
1 - 7/8" socket
Kit Contains:
2 - Handles (1)
2 - Wheels (2)
1 - Foot Bracket (3)
1 - Rubber Bumper (4)
2
11
A16596
ASSEMBLY
Read this manual. Do not at tempt to operate equipment
until you have read this Manual for Safety, Op er a tion, and
12
14
Parts bag contains:
2 - Handle Grips (5)
2 - Handle Brackets (6)
6 - Screws, 5/16-18 x 2.00 (7)
7 - Flange Nuts (8)
2 - Snap Buttons (9)
1 - Screw 5/16-18 x .75 (10)
2 - Bolt, 3/8-16 x 2.25 (11)
2 - Locknut, 3/8-16 (12)
1 - Screw 1/4-20 X .75 (13)
1 - Kep Nuts, 1/4-20 (14)
NOTE: The key numbers
in this figure are referenced
throughout the instructions.
8
10
8
3
4
13
8- ENG
6
7
9
1
5