DynaTrap DT2000XLP-TN19 Manual Del Propietário

DT2000XLP-TN19
OWNER'S MANUAL
FLYING INSECT TRAP
Thank you for purchasing
the DYNATRAP
®
flying insect trap!
This product may be covered by one or more U.S. patents
or pending patent applications. See www.DynaTrap.com/patents
IMPORTANT, RETAIN
FOR FUTURE REFERENCE:
READ CAREFULLY
WARNING: When using electric appliances, basic precautions should always be followed, including the following:
– To disconnect, turn all controls to the off ("O") position, then remove plug from outlet.
– Unplug from outlet when not in use and before servicing or cleaning.
– To reduce the risk of electrical shock, do not put appliance in water or other liquid.
– This appliance is provided with double insulation. Use only identical replacement parts.
CAUTION: To reduce the risk of injury from moving parts, unplug before servicing.
WARNING: Risk of Electric Shock.
See instructions for Servicing of Double-Insulated Appliances.
IMPORTANT SAFETY INSTRUCTIONS
Please read these instructions before using the DynaTrap ® Insect Trap and keep for future reference.
1. Always turn unit off and disconnect plug before servicing or cleaning.
2. Do not position the unit near heat, gas, oil or other flammable materials.
3. Mount out of reach from children.
4. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or
damaged, or if it has been dropped into water.
5. The electrical adapter provided with this product is equipped with a 2-conductor cord and a 2-prong.
If the plug does not fully fit in the outlet, contact a qualified electrician. To reduce the risk of electrical shock,
only plug into a properly installed outlet. Do not attempt to defeat this safety feature.
6. Do not insert fingers or any foreign objects into the unit while it is connected to an electrical outlet.
7. Collected insects within the unit may contribute to fire, so clean insects from the unit frequently.
8. Do not clean this product with water spray. Do not place where it can fall into water, or near flammable materials.
9. Do not touch fan while in motion.
10. Do not abuse cord—never carry or hang unit by cord or yank it to disconnect from receptacle.
Keep cord away from sharp edges.
11. If using outdoors, use only extension cords with a tag stating "Suitable for Use with Outdoor Appliances".
12. Use only extension cords that have plug and receptacles that match the product plug.
Replace or repair damaged cords.
13. Only use attachments recommended or sold by the manufacturer
14. SERVICING OF DOUBLE-INSULATED APPLIANCES - In a double-insulated appliance, two systems of insulation
are provided instead of grounding. No grounding means is provided on a double insulated appliance, nor should
a means for grounding be added to the appliance. Servicing of a double-insulated appliance requires extreme
care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts
for a double-insulated appliance must be identical to those parts in the appliance. A double-insulated appliance is
marked with the words "DOUBLE INSULATION", "DOUBLE INSULATED" or the
INSTALLATION & OPERATING INSTRUCTIONS
1. Unpack unit. Save carton for off-season storage (if needed).
Remove cardboard insert from the retaining cage.
2. Place the air damper assembly in the retaining cage with the crossbar
facing up. Align the six damper notches with the matching notches on the
retaining cage.
3. Place the trap on the retaining cage and twist clockwise to the lock
position.
4. If hanging the unit, place it approximately 3–6 feet above floor or ground
for optimal catch-rate and easy access for cleaning. Unit can also be placed
on the floor or ground.
5. Plug cord into an outdoor outlet extension cord as described
in "IMPORTANT SAFETY INSTRUCTIONS".
6. Turn power switch to "ON" position. The switch is located under the upper
housing near the light bulbs.
7. For best catch results leave unit on at all times, except when cleaning or
servicing.
8. Catch rate activity will be higher at night. For best catch results, place unit
away from other competing light sources.
9. It is recommended to place the unit 20 to 40 feet away from where people
will be sitting.
10. This unit is all-weather resistant – designed for outdoor use including rainy conditions.
11. To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit
in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not change the plug in any way.
AIR DAMPER ASSEMBLY
CLEANING
Frequent cleaning will prolong the life of the unit, ensure fire prevention and provide for more efficient operation.
CROSSBAR
TRAVESAÑO
1. Remove the retaining cage by holding the trap securely and twisting counter clockwise.
2. Grasp the edge of the crossbar and pull up firmly to remove damper assembly.
ALIGNING
3. Dispose of contents and clean any build up from the inside of the retaining cage with a small brush.
NOTCHES (6)
4. Attach the air damper assembly to retaining cage and reattach to trap with a clockwise twist to the lock position.
MUESCAS PARA
IMPORTANT: DO NOT press or push against the screen windows while cleaning or assembling.
ALINEACIÓN (6)
REPLACING BULB Replace With DynaTrap Bulb #32050 (or equivalent T5 Type - 120V/6W UVA Bulbs)
The light bulb life expectancy is approximately 3,000 hours (or about 4 months), and should be replaced regularly to ensure
optimal UV effectiveness. Even though the bulb's light may be visible to you, its ability to attract insects diminishes over time.
1. Turn power switch to "off" position. UNPLUG UNIT (1), and allow bulb to cool before replacing.
2. Remove screw from clear plastic light socket covers (2).
3. Remove both clear plastic light socket covers.
RETAINING CAGE
4. Carefully turn bulb counterclockwise and then pull bulb straight out (3).
5. Locate and insert new bulbs into sockets, carefully turn clockwise, and make sure the prongs of the bulb are seated properly.
6. Replace clear plastic light socket covers and secure with screw.
1
symbol.
AIR DAMPER ASSEMBLY
CROSSBAR
ALIGNING
NOTCHES (6)
RETAINING CAGE
ENSAMBLAJE DE LA
COMPUERTA DE AIRE
JAULA DE
RETENCIÓN
2 3
2 UV LAMPS
ON/OFF
SWITCH
POWERFUL
YET QUIET FAN
HOW THE DYNATRAP INSECT TRAP WORKS
®
2 UV LAMPS
Flying insects are attracted to the unit by the UV light
ENSAMBLAJE DE LA
and CO2 that is generated by the photo-catalysis between
COMPUERTA DE AIRE
the UV lamps and the special TiO2 coating. The fan then
pulls the insects into the screened base, trapping them
TRAVESAÑO
until they dehydrate and die. The base can be removed,
allowing the contents to be periodically emptied into the
trash. The see-through screen shows the insects trapped
POWERFUL
YET QUIET FAN
in the compartment, alerting you when the cage needs
to be emptied.
MUESCAS PARA
ALINEACIÓN (6)
RETAINING
CAGE
TROUBLESHOOTING
Problem: Possible cause: Correction:
Bulbs do not illuminate No electrical power. 1. Check plug, receptacle, and fuse or circuit breaker.
JAULA DE
and fan does not spin.
RETENCIÓN
Bulbs illuminate, but fan Shorted fan. 1.UNPLUG UNIT: Examine fan to see that it is free from
does not spin. foreign material, dirt or build-up of dead insects.
2.Clean unit as in "CLEANING" section.
Fan spins, but bulbs do 1. Bulbs not seated 1. Check all sockets for proper bulb seating and alignment.
not illuminate. properly 2. Replace bulbs if needed following instructions under
2. Burnt out bulbs "Replacing Bulb"
LIMITED WARRANTY
DYNAMIC warranties to the original purchaser that this product is free from defective materials and workmanship. This
warranty is limited to remedy any defective part for a period of one year from date of original date of purchase. Retain
1 2
your original receipt as proof of purchase. This warranty does not apply to the light bulb, nor to, in our judgment, misuse or
abuse. If this unit has been altered, no warranty is in force. This warranty does not apply if this unit is purchased outside the
United States, excluding Canada and Mexico. In no case shall DYNAMIC be liable for any accidental, punitive, consequential,
or any other damages of any kind for breach of this or any other warranty, expressed or implied, whatsoever. Some states
do not allow limitation on how long an implied warranty lasts, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
REPLACEMENT PARTS
32050 2, 6-Watt UV Replacement Bulbs
To see all replacement and accessory parts available for your DynaTrap, including UV-bulbs, fans,
retaining cages, and more, visit www.DynaTrap.com.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD AND COMMERCIAL, INDOOR AND OUTDOOR USE
LOOP FOR HANGING
(OPTIONAL) ULTRAVIOLETA
INTERRUPTOR
PARA PRENDER
Dynamic Solutions Worldwide, LLC
O APAGAR
12247 W. Fairview Ave. Milwaukee, WI 53226
1-877-403-TRAP (8727)
customercare@dsw-llc.com
This device complies with Performance Standards
Visit us online at www.DynaTrap.com
for Light-Emitting Products, 21 DFR, Part 1040,
©2018 Dynamic Solutions Worldwide, LLC
Chapter 1, Subchapter J, Radiological health.
TIO COATED
2
SURFACE
PODEROSO Y
LOOP FOR
HANGING
(OPTIONAL)
ON/OFF
SWITCH
TIO COATED
2
SURFACE
AUTOMATIC
DAMPER
CLOSES WHEN
TURNED OFF
PREVENTING
LIVE INSECTS
FROM ESCAPING
3
2 FOCOS