Saeco Royal SUP 016 E Manual Del Usuario página 47

91
By means of keys move the asterisk to
item "VENDING" and select it through the
ENT key. From the displayed submenu it is
possible to select one of the following items by
means of the same keys . On the contrary,
if the hot water selection key is pressed, the
submenu can be quit.
The following messages will be displayed:
"CODE
" ****"
"1 LARGE COFFEE
"TOTAL 1234...."
"1 COFFEE
"TOTAL 1234...."
"1 SMALL COFFEE
"TOTAL 1234...."
"HOT WATER
"TOTAL 1234...."
"COUNTER
"LOCKING: 1234...."
"COUNTER
"CYCLES 0"
Code programming
A code protects the access to the machine
counters; enter it for each programming section
and before carrying out any modification. As
soon as the code is entered, modifications can
be carried out without entering it again as long
as the programming function is enabled.
The machine is not supplied with a code. Keep
to the following indications for code
programming:
By means of keys move the asterisk to
item "VENDING" and select it through the ENT
PROGRAMMING THE MACHINE
key. The following message will be displayed:
"CODE
"
The following message will be displayed:
"CHANGE CODE
" 0...
"
By means of keys enter the number to be set on
the first character and confirm the selection
" through the ENT key. The entered number is
saved and the cursor moves automatically to the
following character.
"
After having entered the complete new code, it
is necessary to save it.
"
The following message will be displayed:
"NEW CODE
" "SAVE
By means of keys the code can be saved
or not saved: YES or NO.
"
Code entering
To enter the code, press keys and move
"
the asterisk to the counter to be changed; select
it through the ENT button.
The following message will be displayed:
"CODE??
Enter the number to be set on the first character by
means of keys and confirm the selection with
ENT. The entered number is then saved and the
cursor moves automatically to the following character.
If a wrong code has been entered, the following
message will be displayed for about two se-
conds:
"CODE FAULTY
After having entered three wrong codes, the
entering procedure is not allowed any longer.
92
Counter modification
" Large coffee counter
****"
" The counter shows the large coffee amount
dispensed from the last reset.
"
From the VENDING menu, move the asterisk to the
LARGE COFFEE menu by means of keys
confirm the selection with button ENT.
By means of the same keys
to modify the selected value (to reset the counter,
for example). Use the ENT button to save a new
value. Press the ESC button to stop the new value
entering procedure and, as a result, the former
counter setting shall be considered.
Coffee counter
XXXX"
NO"
The counter shows the regular coffee amount
dispensed from the last reset.
From the VENDING menu, move the asterisk to
the COFFEE menu by means of keys
confirm the selection through ENT.
By means of the same keys
to modify the selected value (to reset the counter,
"
for example). Press ENT to save a new value.
On the contrary, by pressing ESC the new value
entering is stopped and, as a result, the former
counter setting shall be considered.
Small coffee counter
"
The counter shows the small coffee amount
PROGRAMMING THE MACHINE
dispensed from the last reset.
From the VENDING menu, move the asterisk to
the SMALL COFFEE menu by means of
keys ; confirm the selection through ENT.
"1 LARGE COFFEE " By means of the same keys
"TOTAL X" to modify the selected value (to reset the counter,
for example). Press ENT to save a new value.
On the contrary, by pressing ESC the new value
entering is stopped and, as a result, the former
counter setting shall be considered.
;
Hot water dispensing counter
it is possible
The counter shows the hot water amount (in ml)
dispensed from the last reset.
From the VENDING menu, move the asterisk to
the HOT WATER menu by means of
; confirm the selection through ENT.
keys
"1 COFFEE "
By means of the same keys
"TOTAL X"
to modify the selected value (to reset the counter,
for example). Press ENT to save a new value.
On the contrary, by pressing ESC the new value
entering is stopped and, as a result, the former
counter setting shall be considered.
;
Counter
, it is possible
After a certain number of cycles, this function
allows to stop the coffee dispensing (excluding
hot water, steam and cappuccino dispensing
operations). It can also be used, for example, to
program the machine servicing.
"1 SMALL COFFEE "
If the 0 value is set, the function is disabled.
"TOTAL X"
From the VENDING menu, move the asterisk to
the COUNTER
keys and confirm the selection through
ENT.
, it is possible
"HOT WATER "
"TOTAL X"
, it is possible
"COUNTER "
"LOCKING 0"
menu by means of