Description Of The Menus; Using The Control Panel - Palazzetti 14060 Uso Y Funciones

1.1.2 Description of the menus

ICON FUNCTION
Power
Stove output setting
Fan This parameter is not enabled on water heating models
Displays the
temperature.
Temperature
Fuel
Not used
Enables or disables the timer. When enabled, the icon
Timer
ICON FUNCTION
[1]
[2]
[3]
[4]
[5]
[6]
[7]
Setup
[8]
[9]
[ 1 0]
[ 1 1]
[ 1 2]
[ 1 3]
[ 1 4]
[30]
[40]

1.2 USING THE CONTROL PANEL

parameter simply use the
active alarm or error codes.
DESCRIPTION
probe*
temperature reading and is used to set the desired
water
SUBMENU
Weekly timer
week
Programs Program setting menu
Time and date setting
Displays the number of hours remaining until recommended
Hours remaining maintenance. When "Hi" is displayed, the remaining time
System
Displays the current software version
information
It allows to set the desired temperature for the water supply
Water
temperature
Enables or disables Eco Mode, in which the stove
Eco function automatically switches off and on based on room temperature
Restart delta off temperature at which the stove switches on again
Frost protection
Minimum temperature below which the stove switches on
temperature
Lock keypad Disables the buttons on the keypad
Display brightness Sets display brightness
Display mode Sets how the data is displayed
Buzzer volume Sets the buzzer volume
Type of pellets Three different types of pellet can be set
Installer menu Sets/displays the stove configuration
Service menu Menu reserved for the service centre
are used to scroll between the different menus that are highlighted.
button and modify the values, again using the
goes back up one level in the menu; pressing and holding the button displays any
will be
DESCRIPTION
buttons.
VALUES
1..5
VALUES
[d1] ... [d7]
[P1] ... [P6]
OFF; Eco
OFF; Lo; Hi
OFF; 1 ... 5
OFF; 1 ... 4
OFF; 1 ... 5
1 ... 3
PWD: "54"
buttons; to set a
buttons. Pressing the
17