Preliminary Operations; Loading The Pellets; Power Supply; Initial Settings - Palazzetti 14060 Uso Y Funciones

2 PRELIMINARY
OPERATIONS

2.1 LOADING THE PELLETS

The pellets are loaded into in the hopper using a
scoop.
Do not empty the sack directly into the hopper so
as to avoid loading sawdust or other foreign bodies
that may affect proper stove operation and avoid
spilling pellets outside of the hopper.
hood of the enclosure and connected to the stove
to follow the installation instructions included with
the kit.
Do not use the stove removal system to load the
pellet tank.
The pellet loading pipe must be used solely as a
capacity (without the pipe).

2.2 POWER SUPPLY

Plug the stove into the mains power supply. If the
connections are correct the stove will emit a series
of intermittent beeps, the display will come on.
For long periods of disuse, we recommend
disconnecting the stove completely from its power
supply.

2.3 INITIAL SETTINGS

Current date and time need to be set before using
the stove.
2.3.1
To set the date:
a) Use the
b) Use the button to select the password "7" and then press
c) Use the button to scroll to and select submenu
d)
e)
f)
g)
h)
i)
j) Press
buttons to go to the setup menu and press ;
[3]
and press
buttons and press
buttons and press
buttons and press ;
buttons and press
buttons and press
;
;
;
;
buttons;
19