Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4. Install hitch – . Feed the carriage bolts ① and spacers ② to attachment holes through access holes using the pull wires ⑤, see Figures 1 & 2. Leave pull wires
attached. Raise the hitch into position and feed the pull wires through bracket holes. Remove pull wires and loosely install conical washers ③ and hex nuts ④ to the
hitch.
5. Tighten all 7/16"-14 Gr 5 fasteners with torque wrench to 50 Ft.Lb. (68 N*M).
6. Reinstall the bottom cover.
©2021 Horizon Global™ Corp - Printed in Mexico
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Sheet 6 of 18
76460NP
03-18-21
Rev. A
Publicidad
Tabla de contenido
