GE Druck DPI 705 Serie Manual De Instrucciones página 6

Declaration Requirements
The DPI 705 IS is designed and manufactured to meet the essential health and
safety requirements not covered by EC Type Examination Certificate
BAS02ATEX1194X when installed as detailed above. This intrinsically safe
instrument is designed and manufactured to protect against other hazards as
defined in paragraph 1.2.7 of Annex II of the ATEX Directive 94/9/EC.
CSA Certification
Markings
IS Class I, Groups A, B, C & D, T4 Exia;
Class I, Zone 0, AEx/Ex ia IIC T4 Ga ........................hazardous location designation
CSA 2012 2541986............................................................................... certificate reference
Amb Temp -10°C to +50°C................................................ ambient temperature range
.......................................................................................................... CSA monogram
DPI 705 IS............................................................................................specific apparatus type
Pressure range in mbar or psi................................................ full-scale pressure rating
Druck LTD, Groby, LE6 0FH, UK.......................... manufacturer's name and address
SN*******/YY-MM.......................................................................serial number and date of
Batteries
WARNING: Only replace batteries in a safe area.
Do not mix cell types. Use only 3 x AA LR6 manganese alkaline primary cells
from the following list:
• Duracell Plus
• Duracell Procell
• Industrial by Duracell
• Energizer Ultimate
• GP Super
Installation
WARNING: Do not use tools on the Pressure Indicator that might cause
incendive sparks - this can cause an explosion.
• Installation should be carried out by qualified plant installation
technicians in compliance with the latest issue of Canadian Electrical
Code (CEC).
• Provide additional protection for indicators that may be damaged in
service.
Special Conditions of Safe Usage
The lower ambient temperature is limited to -10°C, which is more restrictive
than the range specified in the Standard.
K0214 Revision A
manufacture, year-month
4 [EN] English