The C Ockpit Sx M-Link As Pupil Transmitter; Trainer Mode Operations; Accessories And Spare Parts; Multi-Function Socket Interfaces - Multiplex COCKPIT SX M-LINK Manual De Instrucciones

C SX M-LINK
OCKPIT
! Caution:
If you make a change to the F-RESP setting, you will
need to repeat the binding procedure (

20. Trainer mode operations

20.2. The C
OCKPIT
as Pupil transmitter
If used as a Pupil transmitter, the C
can be connected to the following MULTIPLEX Teacher
transmitters:
C SX, C
OCKPIT OCKPIT
PROFI mc 4000, PROFI mc 3010 / 3030
ROYALevo/pro 7/9/12
ROYALpro 7/9/16 M-LINK
(see the Internet for a table of other types)
If you wish to use the C
transmitter, follow this procedure:
1. Switch both transmitters off.
2. Insert the plug marked Schüler (pupil) into the
multi-function socket of the C
Insert the plug marked Lehrer (teacher) into the
multi-function socket of the Teacher transmitter.
3. Switch on the Teacher transmitter only!
Power is fed to the C
OCKPIT
Trainer lead.
PUPILU flashes on the screen.
4. Use the 3-D digi-adjuster to select the pupil type
PUPILM for use with the following MULTIPLEX
transmitters:
e.g. PROFI mc 3010/3030/4000
! Note: ROYALevo/pro as Teacher transmitter
If you use a ROYALevo/pro 7/9/12 or a ROYALpro
7/9/16 M-LINK as Teacher transmitter, the selected
Teacher type on the ROYALevo/pro must be the
same as the Pupil type on the C
ROYALevo/pro
Teach.M
Teach.U
ROYALpro M-LINK
Teach.U
5. A brief button press ( ) stores the setting permanent-
ly. For safety's sake it is now no longer possible to
change the transmitter's setting.
If you wish to terminate Pupil mode, you must switch
the Teacher transmitter off and disconnect the
Trainer lead.
MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • D-75015 Bretten (Gölshausen) • www.multiplex-rc.de
10.2.).
SX M-LINK
SX M-LINK
OCKPIT
SX M-LINK
SX M-LINK as a Pupil
OCKPIT
SX M-LINK.
OCKPIT
SX M-LINK via the
SX M-LINK:
OCKPIT
C SX M-LINK
OCKPIT
PUPILM
PUPILU
C SX M-LINK
OCKPIT
PUPILU

21. Accessories and spare parts

Item
2.4 GHz transmitter aerial
Aluminium stick-tops (1 pair)
6-cell NiMH transm. battery, 1800 mAh
Transmitter charge lead (diode plug)
Transmitter case
Transmitter tray
PROFI transmitter neckstrap
Padded cushion for PROFI neckstrap
"Cross-over" transmitter support strap
USB simulator interface lead
USB PC lead for transmitter
(data back-up / update)
Trainer lead (straight connectors)
Trainer lead (right-angled connectors)
( 20.)
Plug-type battery charger,
230 V / 50 Hz / 2 x 150 mA
For more information relating to accessories and
replacement parts please consult the current main
catalogue or our Internet website: www.multiplex-rc.de.

22. Multi-function socket interfaces

The multi-function socket of the C
provides the following functions:
Charge / discharge the transmitter battery
Trainer mode operations

PC socket for flight simulator

PC socket for data back-up / update
22.1. PC socket for flight simulator
The Cockpit SX M-LINK can be used directly and with-
out further modification as a control unit for many flight
simulators. Special interface leads for MULTIPLEX
transmitters are available from flight simulator manu-
facturers.
If you have queries, please consult the manufacturer of
your simulator program.
Free model flight simulator (FMS) on the MULTI-
PLEX website:
The USB interface lead for use with this simulator is
available from model shops under Order No. (# 8 5153).
Order No.
# 89 3007
# 7 5304
# 15 6001
# 8 6020
# 76 3323
# 8 5306
# 8 5646
# 8 5641
# 8 5640
# 8 5153
# 8 5148
# 8 5121
# 8 5118
# 145537
SX M-LINK
OCKPIT
8.
20., 20.2.
22.1.
22.2.
Page 28