Craftsman CMXGZBF71243311 Manual De Instrucciones página 11

Step 23: (fig. 23)
1. Place a 5/8" flat washer (33) onto the end of the spike
disk shaft and secure the shaft with a 1/8" x 1-1/2" cotter
pin (23) by spreading the ends of the cotter pin. See
figure 23.
2. Fasten the drive disk to the shaft using a 1/8" x 1-1/2"
cotter pin (23) by spreading the ends of the cotter pin.
See figure 23.
Fig. 23
23
33
Step 24: (fig. 24)
1. Remove connecting link from chain and assemble the
chain (47) onto the two sprockets on the left side of the
hopper. Fasten the ends of the chain together using the
connecting link. See figure 24.
2. Place the chain cover over the chain and fasten it to the
hopper end plate using two self tapping screws (31).
See figure 24.
Fig. 24
47
CONNECTING
LINK
23
8
31
ENglISh
9