Craftsman CMXGZBF71243311 Manual De Instrucciones página 6

ENglISh
Step 5: (fig. 5)
1. Fasten the hitch tubes together using three 5/16" x
2-1/2" hex bolts (15) and 5/16" nylock hex nuts (27). Do
not tighten yet. See figure 5.
Fig. 5
27
27
27
Step 6: (fig. 6)
1. Attach the hitch brackets (13) to the hitch tubes using
two 5/16" x 2" hex bolts (17) and 5/16" nylock hex nuts
(27). Do not tighten yet. See figure 6.
2. Install the hitch pin (21) through the hitch brackets (13),
and secure with a 3/32 hair cotter pin (25).
3. Tighten all loose bolts and nuts that have been
assembled.
Fig. 6
4
15
15
17
21
27
25
Step 7: (fig. 7)
1. Assemble a 1/2" x 4" hex bolt (16), a .531 washer (34),
a wheel (6), a .531 washer (34), and a .5" jam nut (29).
Finger tighten only.
2. Attach the wheel assembly to the transport tube using
a 1/2" nylock jam nut (28). Repeat for the other side.
See figure 7.
Fig. 7
15
16
34
13
13
6
34
28
29