Tools You Will Need - Craftsman CMXGZBF71243311 Manual De Instrucciones

ASSeMBLy

tools you will need

(2) 7/16" Wrenches
(2) 1/2" Wrenches
(2) 3/4" or Adjustable Wrenches
(1) Screwdriver
(1) Pliers
Step 1: (fig. 1)
1. Attach a hitch tube to the right hand side of the hopper
using two 5/16" x 2-1/4" hex bolts (17), 5/16" flat
washers (35) and 5/16" nylock hex nuts (27). Assemble
the bolts and washers from inside the hopper. Insert a
tube plug (48). Tighten. Repeat for the other side.
Fig. 1
48
27
27
Step 2: (fig. 2)
1. On the right side, assemble the handle brace bracket (5)
to the lift handle (9) using a 5/16" x 3/4" hex bolt (32)
and 5/16" nylock nut (27). Tighten. See figure 2.
2. Assemble the grip (45) onto the lift handle.
Fig. 2
32
5
27
9
:
17
35
17
35
45
Step 3: (fig. 3)
1. Insert a 5/16" x 3-1/2" hex bolt (14) through the
transport tube (10), the lift handle (9), a spacer (42), and
through the hitch tube. Secure with a 5/16 nylock nut
(27).
2. Insert a 5/16" x 2" hex bolt (17) through the transport
tube (10), two 5/16" flat washers (35), and the handle
brace bracket. Secure with a 5/16" nylock nut (27).
Tighten. See figure 3.
Fig. 3
42
10
14
35
17
Step 4: (fig. 4)
1. On the left side, insert a 5/16" x 3-1/2" hex bolt (14)
through the upper hole on the transport tube (10), a
spacer (42), and the hitch tube. Secure with a 5/16
nylock nut (27). Do not tighten yet. See figure 4.
Fig. 4
14
10
ENglISh
27
27
9
5
35
42
27
3