Connectors; Camera Assist And Audio Station Connectors - Blackmagic Design URSA Manual Del Usuario

Connectors

20
0
SDI OUT
-6
-12
SDI IN
-18
-24
REF IN
-30
-36
TIMECODE IN
-42
-48
TIMECODE OUT
CH1 CH1 CH2 CH2
SOLO MUTE SOLO MUTE
12V L R
IRIS
CH2
MUTE
R
IRIS FOCUS
CH2
MUTE
R
IRIS FOCUS PEAK DISP MENU
The camera assist and audio station features Headphones,
LANC remote control, 3G-SDI Out, +12 V Power Out and XLR
Audio In connectors.
All manuals and user guides at all-guides.com
FOCUS PEAK DISP MENU SLATE
PEAK DISP MENU
SLATE
Connectors

Camera Assist and Audio Station Connectors

Blackmagic URSA's connectors, such as Headphones, LANC, +12 V Power, 3G-SDI out and external
XLR audio are conveniently located on the camera assist and audio station. The rear panel provides
SDI In, SDI Out, reference BNC, and timecode BNC in and out connectors. Use the USB 2.0 connector
located on the bottom panel for updating the internal software.
Headphones
Monitor audio while recording or playing back clips by plugging your headphones into the 1/4" TRS
stereo headphones jack.
LANC Remote Control
The remote port on your camera is used to remotely control record starting and stopping, iris and focus
adjustments when using a compatible lens.
SLATE
The port is a 2.5 mm stereo jack using the standard LANC protocol.
3G-SDI Out
Use Blackmagic URSA's down converted 3G-SDI output to send 1080 HD video to an external viewfinder
when using the camera on your shoulder. This output can also be connected to routers, monitors, SDI
capture devices, broadcast switchers and other SDI video equipment.
+12 V Power Output
Use the 4 pin 12 Volt XLR connector for powering accessories, such as an external viewfinder.
XLR Audio In
Use the balanced XLR inputs to plug in external analog audio from professional equipment such as audio
mixers, PA systems or even external microphones. The XLR connectors supply phantom power so you
can use microphones that aren't self powered. To enable phantom power select Input Levels/Mic Low
or Mic High on the Audio settings touch screen menu. Scroll the menu to reveal the Phantom Power
setting and select On. To disable phantom power, select Off.
Phantom power is active when Audio Input/Inputs is selected.