Touch Screens; Touch Screen Features; Status Strip; Power Indicator - Blackmagic Design URSA Manual Del Usuario

Camera Features
24
Settings can be accessed using the touch screen menus. Press
the Menu button to open the touch screen settings. Navigate
the settings by tapping the icons on the left side of the
screen. Scroll down through the menu to reveal any additional
settings. You can also access camera settings by pressing
the Disp button below a touch screen until the dashboard
appears, then tapping the Settings icon.
The touch screens provide scopes to help set optimum
exposure, focus and audio quality. The battery indicator
changes to the external power icon when external power is
plugged into the 12-20V XLR input.
All manuals and user guides at all-guides.com

Touch Screens

Each work station features a touch screen so you can monitor your recordings, view scopes, apply settings
and activate camera features.
By pressing the Disp button you can switch between viewing your clips during recording and playback,
you can open the dashboard where you can access camera features and apply settings, or you can
view scopes and status information. Scopes are provided to assist with focusing, setting exposure
and audio monitoring.

Touch Screen Features

Status Strip

Your chosen settings are always displayed on a status strip at the top of each touch screen, showing a
convenient summary of your camera's settings.

Power Indicator

The power indicator displays a battery icon when using battery power, or an external power icon when
plugged into external power via the 12-20 Volt XLR input.

Duration Display

The duration display provides a timecode counter for checking the duration of your clips and
monitoring timecode during recording and playback. The counter displays a time sequence showing
Hours:Minutes:Seconds:Frames and will progress through the sequence as you record or play back clips.
The displayed duration of each clip starts from 00:00:00:00 for the first clip, or from the end of the
previous recorded clip. For example, if a clip stopped recording at 00:06:25:00, the next clip will start
recording at 00:06:25:01.
Clip duration is displayed on the touch screen, however time of day timecode is embedded into your
clips for post production, so it's worth regularly checking the time settings in the Camera settings menu
to make sure they are always accurate.