Audio Settings; Audio Input; Phantom Power - Blackmagic Design URSA Manual Del Usuario

Settings
28
Scroll the menu to reveal
more Audio settings.
Record channel 1 audio on channels 1 and 2 by selecting Yes
on the Ch 2 uses Ch 1 Input setting.
All manuals and user guides at all-guides.com

Audio Settings

To adjust audio input and monitoring settings on your Blackmagic URSA, select the Audio touch screen
menu, then tap or slide the relevant arrows and slider icons with your finger. Scroll the menu to reveal
more Audio settings.

Audio Input

To change the audio input between camera mic and external XLR inputs, select Camera or Inputs.
Microphone Level
Microphone Level adjusts the recording levels for Blackmagic URSA's built in microphone. Move the
audio slider left or right to adjust levels. The built in microphone records to audio channels 1 and 2.
Input Levels
Set the external audio input levels by tapping the relevant left and right arrow icons. External audio
connectors support line, or microphone levels with 48V phantom power. It's important to select the
appropriate level for your audio signal. Level settings include Line, Mic Low, and Mic High.
Channel 1 Input
Touch and drag the Ch 1 Input slider icon left or right to adjust the channel 1 audio level.
Channel 2 uses Channel 1 Input
Select Yes if you want to record channel 1 external audio to channels 1 and 2. Select No if you want
channel 1 audio to remain on one channel only.
Channel 2 Input
Touch and drag the Ch 2 Input slider icon left or right to adjust the channel 2 audio level.

Phantom Power

Select On to enable phantom power, or Off to disable. The phantom power setting is active only when
Audio Input is set to Inputs with Mic Low or Mic High input levels selected.
Headphone and Speaker Volume
Touch the headphone or speaker volume icon and drag left or right to adjust audio monitoring levels.
When headphones are connected, the headphone setting is displayed. Alternatively, when headphones
are not detected, the speaker setting is displayed. Headphones are active when recording or playing a
clip. The built in speaker is active only during playback.