Motorola Solutions PMMN4050 Manual De Instrucciones página 7

Replacing the Coil Cord
To remove the cord (disassembly):
1. With the front of the RSM facing down, remove the
screws from the rear of the microphone using a Phillips
type screwdriver. Retain the screws for reuse.
2. Remove the rear housing by lifting it straight up and
away from the front housing (See Figure 2 below).
3. Unplug the coil cord connector plugs from the circuit
board connector jacks.
4. Lift the cord with the rubber strain relief out of the front
housing (See Figure 3 below).
Figure 2.
Figure 3
5