Assembling Your Vacuum; Using The Motorised Floor Nozzle - Shark DuoClean Flexology HV390EU Serie Manual Del Usuario

ASSEMBLING YOUR VACUUM

WARNING: This
vacuum does not stand
up on its own. Using
the unit when it lacks
stability may result
in personal injury. To
place in Flexology™
Storage mode, press
the Flexology™ Lock
Release Button
and gently fold the
handheld vacuum
forward toward the
floor nozzle�
NOTE: Before vacuuming
your delicate area
rugs or carpet, refer
to the manufacturer's
recommended cleaning
instructions.
WHAT DOES THE
BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green
The brushrolls are on and
working as they should.
Solid Red
There is a jam in the
brushroll area. Turn your
vacuum off and remove
the blockage.
Insert the wand into
No Light 1
The brushrolls are not the motorised floor
nozzle connector,
spinning.
pressing it in until it
clicks securely into
DID YOU KNOW?
place.
The motorised floor nozzle
has LED headlights that
illuminate the floor surface
being cleaned. The lights
turn on automatically in
either speed setting.
7
STEP 1 STEP 2
CLICK
CLICK
2 Insert the handheld
vacuum into the top of
the wand, pressing it in
until it clicks securely
into place.

USING THE MOTORISED FLOOR NOZZLE

Slide the Power/Selector Switch to
1
one of the 3 settings:
Setting O: Turns off power.
Setting I: For cleaning hard floors
and rugs.
Setting II: For cleaning thick pile
carpets.
To start cleaning, recline wand to
activate brushrolls.
English was updated:
Area rugs = rugs
USING THE MULTIFLEX™ WAND
To easily access hard-to-reach areas
under furniture, press the Flexology™
Lock Release Button to position the
wand to a lower angle.
s h a r kc l e a n . e u 8