Far Tools CM 250 Manual De Instrucciones página 27

Position A on the top = AUTO advance Position B = training rollers stop
STOP
guide the woodpiece Emergency stop utilisation
STOP
Replacement of planing tools
Settings:
The planer accept following tools: 250mm x 3mm x 30mm
The blades will be used, when the height of this blades
make only 20 mm, She must be replaced:
place setting tool delivered on the roller,
These springs act against the bottom of the planer
blade, to push it into contact with the setting tool
and unscrew nuts one by one
Setting tool
spring
Blade
Nut
113752-Manuel-A-EN .indd 27 10/04/07 16:13:32