Installation Instruction - Trail-Tec WYR040707R Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
04 07 07R-T / 15.03.2019
Packing list: 1 7-conductor cable set
1 7-pin socket
1 Socket retaining plate
1 Trailer indicator modules Trail-tec 12-00 1 Screws M6X10
1.
Disconnect the earth lead from the battery.
2.
Remove cover of boot bottom, wall casing of rear lock and both side boot hatches.
3.
In order to draw cable set, drill additional 40 mm diameter hole. In vehicles without Park Distance Control (PDC),
the hole is located under right rear parking light. In vehicles with PDC, the hole is located in a flat place of rear wall
of spare wheel well. Secure the drilled hole with an appropriate anti-corrosion remedy.
4.
Connect cable set in the following way:
a)
Draw end of 7-conductor set of cables with metal terminals from boot thought the hole referred to in item 3
outside, then pull it through the hole in plug socket holder. Fasten initially assembled cable sleeve in the
aforementioned hole.
b)
There are two different washers under the socket. One is used by side entrance of leads, the other - in axis
entrance.
Side entrance: used in permanent assembly of tow hook with closed socket holder and detached tow
hook with folded socket holder. In such event, remove overpass in casing of connection socket.
Note !!! Use washer under socket assigned to side entrance for folded socket holder. Remove the other
washer assigned for axis entrance (it will not be used).
Axis entrance: used in permanent assembly of tow hook with opened socket holder and detached tow
hook without folded socket holder.
Remove washer assigned for side entrance (it will not be used).
c)
Socket is connected according to the following scheme:
Picture1
Function
Indicator left
Fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
5.
Assemble connection socket with packing washer using enclosed screws and nuts on socket holder:
a)
Carefully fasten washer in the appropriate way,
b)
Fasten electric bunch in such a way that there are no sharp bends and no wear.
Electrical Set for Trailer Connection
040707R
WYR
Part no.
7-pin BMW 5 er E 39 Lim. manufactured 12.95 -09.00
1 Nuts M6
3 Screws M5X35
3 Nuts M5

Installation instruction

Contact description
Cable colour
1
(L)
black/white
2
(54-G)
grey
3
(31)
brown
4
(R)
black/green
5
(58-R)
grey/red
6
(54)
black/red
7
(58-L)
grey/black
4 Spring washer
10 Cable ties 100 mm
1 Fuse base with a fuse
3 Cable ties 300 mm
1 Red connection cable
2 Self-adhesive tape
1 Sheet-metal screw
1
2
6
7
3
5
4
Contact description in
7-pin socket

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

107054-01449-1

Tabla de contenido