Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

4

What Does The Beep Mean?

When you hear 1 beep (short high tone) it means data has been
decoded successfully. If any other beeps are heard, contact the
technical person in charge of scanning.
What If...
nothing happens when you follow the operating
instructions.
• Check the system power.
• Check for loose cable connections.
• Be sure the scanning system is programmed to read the
type of bar code you are trying to scan.
• Check to be sure the symbol is not defaced.
two distinct scan beams are visible?
The LS 32xxER has two separate lasers, one for reading bar
codes at close range, the other for long range. This is how the
scanner can read bar codes over such a wide range of distances.
The two beams converge at approximately 12 inches from the
nose of the scanner. At all other distances, both beams may be
visible. This is normal, and does not indicate a defect in the
scanner.
Quick Reference

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Lxe ls-3203-erLs-3203erLs-3280Ls-3200Ls-3220

Tabla de contenido