Mopar 82213310 Instrucciones De Montaje página 13

34. Press in on the release tabs at the back of the
60 way connector and slide the plug out
from the outer casing.
35. Position the three wire ends from the shortest section
of the body harness near the back of the connector.
Insert the harness wiring as follows:
Brown wire into Pin 1
Orange wire into Pin 33
Red wire into Pin 48
36. Reinstall the plug into the outer casing. Be sure
the retaining clips snap into place.
37. Reinstall the 60 way connector into the BCM.
Lock the connector in place with the blue retaining
handle (see Fig 9).
9/25/12
13