Publicidad
Idiomas disponibles
Idiomas disponibles
GB
FMHT77598
• If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment
may be impaired.
• Do not operate the laser in explosive atmospheres,
such as in the presence of flammable liquids, gases,
or dust. This tool may create sparks which may ignite the
dust or fumes.
• Store an idle laser out of reach of children and other
untrained persons. Lasers are dangerous in the hands of
untrained users.
• Tool service MUST be performed by qualified repair
personnel. Service or maintenance performed by unqualified
personnel may result in injury. To locate your nearest Stanley
service center go to http://www.2helpU.com.
• Do not use optical tools such as a telescope or transit to
view the laser beam. Serious eye injury could result.
• Do not place the laser in a position which may cause
anyone to intentionally or unintentionally stare into the
laser beam. Serious eye injury could result.
• Do not position the laser near a reflective surface which
may reflect the laser beam toward anyone's eyes. Serious
eye injury could result.
• Turn the laser off when it is not in use. Leaving the laser
on increases the risk of staring into the laser beam.
• Do not modify the laser in any way. Modifying the tool may
result in hazardous laser radiation exposure.
• Do not operate the laser around children or allow
children to operate the laser. Serious eye injury may result.
• Do not remove or deface warning labels. If labels are
removed, the user or others may inadvertently expose
themselves to radiation.
• Position the laser securely on a level surface. If the laser
falls, damage to the laser or serious injury could result.
8
EU
Use only with
charger listed
www.STANLEYTOOLS.com
in Operator's
5002595
Manual
Li-ion
2INR19/66
7.2V DC
2.0Ah 14.4Wh
Personal Safety
• Stay alert, watch what you are doing, and use common sense
when operating the laser. Do not use the laser when you are
tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating the laser may result
in serious personal injury.
• Use personal protective equipment. Always wear eye
protection. Depending on the work conditions, wearing
protective equipment such as a dust mask, non-skid safety
shoes, hard hat, and hearing protection will reduce personal
injury.
Tool Use and Care
• Do not use the laser if the Power/Transport Lock switch
does not turn the laser on or off. Any tool that cannot be
controlled with the switch is dangerous and must be repaired.
• Follow instructions in the Maintenance section of this
manual. Use of unauthorized parts or failure to follow
Maintenance instructions may create a risk of electric shock
or injury.
Battery Safety
The FMHT77598 laser is powered by a Li-ion battery.
WARNING:
To reduce the risk of injury, the user must read the
product User Manual, Laser Safety Manual, and the
Battery Safety Manual.
Charging the Battery
Use the charging unit that is packaged with the FMHT77598
laser to charge the laser's Li-ion battery.
1.
Insert the electrical plug at one end of the charging unit
into an electrical outlet (Figure
2.
On the back of the laser, pull the port cover off and to the
side (Figure
).
C 2
3.
Insert the small end of the charging unit into the laser's
charging port (Figure
C 3
4.
Allow the battery time to fully-charge. The Power LED will
remain on while the battery is charging.
5.
After the Power LED turns off, disconnect the charging unit
from the electrical outlet and the laser's charging port.
).
C 1
).
Publicidad
