Flushing Kit Installation; Kit Mounting - Bosch ACT550 Manual Original

en Flushing kit _______________________________________________________________________
4.0 -

FLUSHING KIT INSTALLATION

4.1 -

Kit mounting

CAUTION:
Kit must not be installed for AC788PRO and ACS 752 stations.
Use service hoses equipped with the station to carry out the flushing
procedure.
WARNING:
Before carrying out the installation it is necessary to disconnect the
A/C station from the power supply system.

Make sure the kit is complete (see chapter 3.0).

Remove the front and back thermoforms of the A/C station.

Remove the 2 plugs placed on the hoses side of the A/C station.

Take the assembled valve (3) from the kit.
34
3
Operating instructions