Bosch ACT550 Manual Original página 44

en Flushing kit _______________________________________________________________________

Screw the filter (4) to the flushing kit using Loctite 542. Tighten to a torque
of 15Nm.
6

Re-attach the flushing kit to the air conditioner service unit.

Connect LP service hose to filter outlet (6).

Connect HP service hose with the red adapter hose to flushing kit inlet (7).

Set a vacuum phase of 10 minutes and start this running.

Perform a leak test.
Filter replaced.

A/C Station
44
4
High side red service hose
(without quick coupler)
Low side blue service hose
7
Red adapter hose
Operating instructions