Technical Specifications; Safety Precaution - Anest Iwata iCon-M433N Manual Del Usuario

Airless and Multi Spray iCon Pumps

6. TECHNICAL SPECIFICATIONS

VERSIONS
Plunger Pump:
Air Motor cylinder diameter:
Weight:
Dimensions (LxWxH):
Paint filter:
Max. fluid working pressure:
Max. air inlet pressure:
Pressure ratio:
Working temperature:
Noise level:
Compressor required power:
Fluid output:
Max. No. of cycles par minute
Wetted parts
material:
7. INSTALLATION
WARNING
6
Paint delivery filter
Fluid suction filter
Max. fluid delivery
Max. volume/min.
Paint filter set
Suction hose set
Fluid pump

SAFETY PRECAUTION

TO ENSURE THE GOOD WORKING OF THE EQUIPMENT AND OF ITS SAFETY DEVICES, THE PUMP MUST
BE INSTALLED BY A QUALIFIED STAFF.
THE ORIGINAL CONFIGURATION OF THE EQUIPMENT MUST BE NOT CHANGED AT ALL.
SECURELY GROUND PUMP, SPRAY GUN BY USING CONDUCTIVE FLUID HOSE AND GROUND WIRE
SUPPLIED WITH EQUIPMENT.
CHECK THE PROPER TIGHTENING OF ALL FITTINGS, SINCE THEIR SUDDEN OPENING CAN
SERIOUSLY INJURE PEOPLE.
CAREFULLY READ AND OBSERVE SAFETY WARNING OF THE INSTRUCTIONL OF THE SPRAY GUNS
TO BE USED.
ICON-Mxxx: MSGS-200 / ICON-Axxx: ALG7 TE
BEFORE INSTALLATION SET THE AIR AND FLUID REGULATORS TO 0 bar.
ICON-M333N / ICON-A333N
PP-3260N
125 mm
40 Kg
496 x 627 x 1164 mm
TF-8N (100 Mesh)
50 mesh
224 bar (22.4 MPa)
32:1
99.7 dB(A)
60 ml
3.6 l/min.
Body: AISI303 - Filter: AISI304/Polyamide
Hose: Rubber - Pipe, Filter and Connection: AISI304
Mainly: AISI303 - PE - PTFE
ICON-M433N / ICON-A433N
PP-3688N
160 mm
46.5 Kg
15 mesh
252 bar (25.2 MPa)
7.0 bar (0.7 MPa)
36:1
5°~40° C
97.2 dB(A)
> 1.5 Kw
88 ml
5.2 l/min.
60 cyc