Samsung SNC-C7478 Manual Del Usuario página 26

How to use OSD Menu
 Set up Action, Dwell time and Option. Note that
selected item is displayed in reverse. Move cursor
left/right to select items and move cursor
up/Down to change each value.
EDIT SCAN
NO. ACTION NO. DWELL OPT
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
SAVE [◄ ►:MOVE CURSOR]
CANCEL [▲▼:CHANGE VAL.]
• Action NO.
[NONE/PRESET/AUTO PAN/PATTERN]
• DWELL [1 second ~ 4 minutes]
Sets Dwell Time between functions
• OPT
Option. It represents preset speed (2~360)
when preset is selected. It should be the
number of repetition (1~255) when Pattern or
Auto Pan is selected for Action
 Set up items such as Action, NO., Dwell and
OPT.
EDIT SCAN
NO. ACTION NO. DWELL OPT
1 PRESET
2 NONE
3 NONE
4 NONE
5 NONE
SAVE [◄ ►:MOVE CURSOR]
CANCEL [▲▼:CHANGE VAL.]
6 – 36x IP Smart Dome Camera
1
1
1 00:03 360
 After finishing setting up an Action, press Near
or eNTer key to one-upper-level menu (Step ).
Move cursor up/Down to select Action number
and repeat Step  ~ Step  to edit selected
Scan.
EDIT SCAN
NO. ACTION NO. DWELL OPT
1 PRESET
2 NONE
3 NONE
4 NONE
5 NONE
SAVE [NEAR:EDIT ACT]
CANCEL [FAR :EDIT END]
 After finishing setting up all Actions, press Far or
leFT key to exit. Then cursor should be moved
to "SAVE." Press Near or eNTer key to save
data.
EDIT SCAN
NO. ACTION NO. DWELL OPT
1 PRESET
2 NONE
3 NONE
4 NONE
5 NONE
SAVE
CANCEL
1
1 00:03 360
1
1 00:03 360