Error Messages - KRESS Mission Nano KR101E Manual De Instrucciones

Error Messages

Sometimes things can go wrong. Fortunately Mission
an issue, so you can fix it. If in doubt, please visit our website where you will find useful videos and further
support.
Message
14
EN
Cause
Error unknown. Please contact Customer Services.
Your Mission
Rain delay.
has expired.
1. If Mission
off, take Mission
Press START.
Boundary wire
2. If Mission
missing or
the charging base is green. If not, verify that the charging base is
Mission NANO
TM
properly connected to the charger and that the charger is connected
outside wire.
to a suitable power supply. If they are properly connected, the
boundary wires are clamped incorrectly and must be reversed.
3. Reverse the boundary wire ends.
Turn power off and take Mission
obstacles.
Turn power on. Press START. If the error message is still displayed,
Motor wheels fault.
turn power off. Turn Mission
there's anything preventing the wheels from rotating.
Remove any obstruction, turn Mission
Turn power off.
Turn Mission
injury and check if there's anything preventing the blade disc to
rotate.
Motor blade fault.
Remove any obstruction.
Turn Mission
or adjust the cutting height;
Turn power on. Press START.
Turn power off.
Take Mission
power on. Press START.
If the error message is still displayed: turn power off, turn
Error trapped.
Mission
the wheels from rotating.
Remove any obstruction, turn the Mission
on.
Turn power off.
Take Mission
on. Press START.
If the error message is still displayed: turn power off, turn
Error lifted.
Mission
cause Mission
Remove any possible object, turn Mission
on.
Error Upside Down
Turn Mission
(tilted).
NANO is smart enough to tell you if it is encountering
TM
NANO will start after the rain stops and the rain delay
TM
NANO is actually outside its working area: turn power
TM
NANO inside its working area. Turn power on.
TM
NANO is inside its working area, check if the LED on
TM
NANO upside-down and check if
TM
NANO upside down, put on safety gloves to prevent
TM
NANO upright and take it to an area with short grass
TM
NANO to an area in your lawn free of obstacles, turn
TM
NANO upside-down. Check if there is anything preventing
TM
NANO to a lawn area clear of obstacles, turn power
TM
NANO upside-down and check there's anything that can
TM
NANO to be lifted up.
TM
NANO upright.
TM
Action
NANO to an area free from
TM
NANO upright, turn power on.
TM
NANO upright, turn power
TM
NANO upright, turn power
TM