Mopar 82213170 Instrucciones De Montaje página 8

8
17. Wrap the harnesses with electrical tape to secure
the new wiring as needed. Reconnect the plugs
to the fuse box. Carefully press the fuse box back
into position. Be sure not to crimp any of the
harnesses.
18. Locate the ground wire behind the fuse box.
Remove one (1) 10mm nut and install the ground
eyelet from the power harness (D). Reattach the
ground wire.
19. Locate and remove two (2) 10mm inside the edge
of the fender next to the fuse box.
11/29/12