Use And Maintenance; Mode Selection: Roller Or Tilting Mode - SOMFY Sonesse 30 RTS Manual De Usuario

EN
NOTICE
The drive will not respond to any control points commands for 15 minutes
1] Press and
programming button until the motorised
product briefly moves up and down.
2] Briefly press the drive head programming
button, the motorised product briefly
moves up and down twice.
g "Sleeping mode" is activated, green
LED blinks 5 times to confirm, then
orange LED blinks every second as
long as the drive is in the temporary
sleeping mode.
3] To deactivate the "Sleeping mode", briefly
press the drive head programming button.
g The motorised product briefly moves
up and down, the control point
commands are enabled. Green LED
blinks 5 times.

3.USE AND MAINTENANCE

NOTICE
This drive does not require any maintenance operations.

3.1.Mode selection: Roller or Tilting Mode

The drives are designed to work in 2 modes: Tilting mode or Roller mode.
This feature allows the drive to be set according to the type of application.
NOTICE
The drive is set (by default) to work in Roller mode.
18
hold the drive
©
Copyright 2020 SOMFY ACTIVITES SA. All rights reserved.
head
1]
2]
3]
Sonesse 30 RTS
x2