Care and maintenance
Removing the oven doors
CAUTION
• The door is very heavy. Be careful when removing and lifting the door.
• Do not lift the door by the handle.
Use two hands to remove an oven door.
A. Wire Harness
A. Oven door hinge lock in locked
position
B. Oven door hinge lock in unlocked
position
74
English
NW9000K_MOD_DOB30M977S_DG68-00920A-02_EN+MES+CFR.indb 74
A
A
B
1. Prior to removing the oven door,
prepare a surface where you will place
it. This surface should be flat and
covered with a soft blanket. You can
also use the corner posts from your
packaging material.
2. Disconnect the LED light's wire harness
from the bottom right of the door.
3. Open the oven door.
4. Locate the oven door hinge locks in
both corners of the oven door, and then
rotate the hinge locks toward the oven
door to the unlocked position. If the
door hinge lock is not rotated fully (see
illustration B on the left for an example
of full rotation), you will not be able to
remove the door properly.
5. Partially close the door to engage the
door latch locks. The door will stop at
this point.
2019-04-23
6:03:06