Descargar Imprimir esta página

Mopar 82214097 Instrucciones De Montaje página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

9. Inside the fender edge, remove the existing long
hex nut. Position the ground ring terminal from the
switch harness onto the stud (B) and reattach the
nut to secure.
10. Route the switch harness (B) under the rear
cross member and out near the positive battery
terminal.
11. Feed any slack from the switch harness (B) towards
the rear of the engine compartment. Secure along the
existing vehicle harness with cable ties (E).
9/19/13
5

Publicidad

loading

Este manual también es adecuado para:

8221388182215104ab