Sealing Access To The Balance Settings - OHAUS Pioneer PX323/E Manual De Instrucciones

Pioneer
™
Line Format [LinE Fo] – Single line format [single] will put all the data in one line separating each output with a
comma (,). Multi line format [mMulti] will put each data output on a new line. Multi +4 [mM-4LF] will add 4 line
spaces between each output.
^^^^^^^^^^^^^^^^^^^^^
User ID: ..........................
Bal ID: 123456789
Proj ID: ........................
Time: ......:.......:.......
Date: ...../ ..... / .....
120.01 g
^^^^^^^^^^^^^^^^^^^^^
4.7 RS232 Menu [.rs232.]
Baud [BAUD] – The RS232 baud rate can be set to 600, 1200, 2400, 4800, 9600 and 19200.
Parity [Parity] – Parity can be sent to 7 bits-even parity [7 eveN], 7bits-odd parity [7 odd],
7bits-no parity [7 No] or 8bit-no parity [8 No].
Handshake [Handsh] – Handshake can be set to off [Off], X on – X off [on-off], or hardware [HardwWr].
4.8 Lock Menu [.LOC.]
When a Lock Menu item is SET ON the indicated menu cannot be changed.
[Loc Cal] – Calibration, [Loc SEt] – Setup, [Loc.mMod] – Mode, [Loc.Unit] – Unit,
[Loc Prt] – Print, [Loc 232] – RS232.

4.9 Sealing Access to the Balance Settings

The Menu Lock switch prevents changes to the Lock Menu. The switch can be secured using paper seals, wire
seals or plastic ties.
Un-Locked
Multi Line Format with 4 line feeds
Line Feed-2
Line Feed-3
Line Feed-4
GLP (ON)
Balance ID (ON)
GLP (ON)
GLP (ON)
GLP (ON)
Result
Locked with Plastic Tie
EN-8