Tabla de contenido
Publicidad
English
When the programmed switch off function is active, the fol-
lowing message is displayed:
MACHINE OFF
Press the "STOP/Coffee continue" (37) key to force the ma-
chine on again.
2.
Cup-Warmer
CAUTION: do not put any cloth on the cup-
warmer.
The machines have a cup warmer tray (23) for stocking and
pre-heating the cups.
3.
Drinks distribution - coffee
press.
21 or 25
place. Position the cup (or cups) under the spout (or spouts)
21 or 25).
Press the coffee distribution key (32, 33, 35 or 36) corresponding
to the desired dose. The corresponding led lights up, the coffee
will be issued and will stop automatically upon completion.
Press the continuous/STOP distribution button (37) for a
continuous distribution.
The distribution, both dosed and continuous, may be interrupted
at any time by pressing the continuous/STOP key (37).
23
5
21 or 25), clean it of the used
Forced switch on
N.B. Forcing the machine on does not change the programmed
on/off times.
N.B. At this point the machine will remain on until the next
switch off time is reached.
To immediately return the machine to "off" as originally pro-
grammed, switch it off and on again using the general on-off
switch (1).
Only place cups and glasses used with the coffee machine
on the cup tray. No other objects must be placed on the
tray.
Thoroughly drain the cups before placing them on the tray.
To activate the resistance of the cup warmer tray (23) press
button (6); to change the cup-warmer power, press the (6)
key a number of times.
- All LEDS (5) on = full power
- All LEDS (5) off = OFF
6
To desactivated the heating of tray (23) press more times the
key (6) until all the leds are off.
N.B. The heating of the cup warmer tray (23) is deactivated
during the automatic switch off phase.
The condition in effect at the time when the machine was
switched off will be restored the next time the machine auto-
matically switches on.
32
33
25
43
English
36
35
37
Publicidad
Tabla de contenido
