Fossil 515.2 Manual Del Usuario página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 27
Chronograph
6S21
CHRONOGRAPH
MINUTE HAND
DATE SETTING
1 . Pull crown out to position 2 .
2 . Rotate clockwise to set date .
3 . Return crown back to position 1 .
If the date is set between the hours of 9:00 PM and 1:00 AM, the date may not
change on the following day .
TIME SETTING
1 . Pull crown out to position 3 .
2 . Rotate clockwise to set time .
3 . Return crown back to position 1 .
CHRONOGRAPH
This chronograph is able to measure and display time in 1/4 second up to 59
minute 59 seconds
1 . Press A to start/stop the chronograph
2 . Press B to reset to zero
CHRONOGRAPH ZERO RESET
1 . Pull crown out to position 3 .
2 . Press A once to set the chronograph second hand to zero .
The chronograph hands can be advanced rapidly by continuously pressing A .
3 . Return crown back to position 1 .
10
CHRONOGRAPH
A
SECOND HAND
B
Digital
QFO-AA-23
OVERVIEW
Features include CALENDAR,
ALARM, 12/24H FORMAT,
CHRONO, TIMER, DUAL TIME,
EL BACKLIGHT .
TIME SETTING
1 . Press and hold C for 2
seconds to enter time setting mode; "seconds" will begin flashing .
2 . Press B to set and advance to next setting value .
3 . Setting sequence is seconds, minutes, hour (12/24H format), month, day, week .
4 . Press D to advance the flashing digit .
5 . Press C to exit setting mode .
NOTE: Pressing D while the seconds are in the range of 30 to 59 resets them to
00 and adds 1 to the "minutes" . In the range of 00 to 29, the minutes are
unchanged . NOTE: Press A for 3 seconds to activate EL backlight .
ALARM SETTING
1 . Press D to turn on/off the alarm or chime .
2 . To set the alarm, press and hold C for 2 seconds to select "hour" setting; Press B
to select "minute" setting; Press D to advance the flashing digit .
3 . When the alarm reaches the scheduled time, the alarm icon will flash and the
chime will sound for 20 seconds then automatically stop .
CHRONOGRAPH
1 . Press D to start/stop chronograph .
2 . When stopped, press C to return to zero .
3 . When running, press C to split count, then press D to exit split count
4 . Press C to return to zero .
5 . Press B to return to time setting .
TIMER MODE
1 . The display range of the timer is 23 hours, 59 minutes, and 59 seconds .
2 . Press D to start/stop the timer . Press C to return to starting value .
3 . Timer sounds for 10 seconds when counting down to 00:00:00 . The timer will
automatically reset to its starting value after the alarm stops .
4 . To set time to a specific time press C for 2 seconds, "hours" will begin
flashing .
5 . Press B to select hours or minutes setting, Press D to adjust the flashing
item, Press C
(Light) A
(Mode) B
D (Start/Stop)
C (Set/Reset)
11

Publicidad

Tabla de contenido
loading

Tabla de contenido