EHEIM 3585 Manual De Instrucciones página 7

Closing the housing cover: insert in the upper edge of the drive unit
and push downwards until the lock engages.
Changing batteries: should the
batteries are almost empty. The fertilizing process will still be carried
out, but the batteries should now be replaced. After about three days
the entire system will blink and the device will shut off automatically, in
order to prevent the container stopping in a downward position.
Velcro tape: The supplied Velcro tape can be used as a means of fas-
tening the automatic fertilizer to the aquarium.
C Programming
The fertilizing mode offers 3 possibilities, which are shown on the dis-
play to the right of the digits 1 - 4 :
No arrow = The time is stored but no fertilizing occurs;
1 arrow = The container rotates once;
2 arrows = The container rotates twice with 1 minute interval. This in-
creases the quantity dispensed without occupying addi-
tional fertilizing times.
General programming rules:
MODE initially switches between the current time and the fertilizing
times 1 - 4 consecutively. The current time is displayed whenever you
see the blinking double point: the fertilizing times are differentiated
by the digits (1 - 4) on the upper section of the display.
SET allows the respectively displayed times to be changed. With
MODE, the displayed time can be changed between hours, minutes
and fertilizing time. The respective symbol blinks and can be set to a
higher number with the » + button « . SET stores the set time, while
reverting back to MODE the next fertilizing time is displayed.
Example:
After changing the batteries, time begins at
blinks every second:
Setting the current time:
SET > Hours blink and are set with + .
MODE > Minutes blink and are set with + .
SET > Current time is stored.
Programming fertilizing time 1:
MODE > Fertilizing time 1 is displayed with
on the upper section of the LCD.
SET > Hours blink and are set with + .
MODE > Minutes blink and are set with + .
MODE > Digit 1 blinks. The fertilizing mode must be set with + .
1 = Fertilizing process is carried out once.
LO
symbol appear on the display, the
00 : 00
and the colon (:)
00 : 00 and digit 1