Storing The Product; Product Introduction; Intended Use; Pumped Liquid - Grundfos S Serie Instrucciones De Instalación Y Funcionamiento

Ocultar thumbs Ver también para S Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 67

4. Storing the product

The products must be stored in dry, clean conditions and protected against
external and mechanical damage.
The storage temperatures can be found in the technical data. See section
8. Technical
data.

5. Product introduction

5.1 Intended use

Level transmitters are used to carry out hydrostatic level measurements in
ventilated tanks or to gauge water levels in open waters. They are designed
to hang vertically from the cable.
The correct level transmitter should be selected with regard to the measuring
range, version and specific measuring conditions on site before mounting,
installation and startup. The specifications provided by the manufacturer are
intended as suggestions only, except those relating to the test series. The
decision is to be made by the operator.
The manufacturer cannot accept liability for damage resulting from improper
use or in the event of use contrary to the intended purpose.
To prevent damage to the level transmitter and to safeguard its process,
mounting, installation and startup must only be performed by qualified
personnel. Personnel must be familiar with local regulations and be aware of
applied standards and directives to prevent bodily injuries and material
damage.

5.2 Pumped liquid

The PE-LD cable is shielded and suitable for use in water such as lake,
water well, and mine water. The cable is UV-resistant.
The FEP cable is shielded and suitable for use in water such as sea, lake,
water well, and mine water as well in different oils, fuels, and solvents. The
cable is UV-resistant.
The EPR cable is a submersible motor cable.
10

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

W serieE serie

Tabla de contenido