Clock & Alarm; Set Date And Time; Set Alarm Melody - Motorola D710 Serie Manual De Instrucciones

D711_IFU_EN_for_EU.book Page 14 Friday, August 24, 2007 3:58 PM
Delete entire redial list
e m
1. Press then press .
d m
2. Scroll to DELETE ALL and press .
m
3. Display shows CONFIRM?. Press to confirm. Press
to standby.
14
6. Clock & Alarm
If you subscribe to your network's Caller Identification service, the time on your D711 may be set
>
to return
automatically each time you receive a call, depending on your network provider.
You can also set or adjust the time using the Clock & Alarm menu.

Set date and time

1. Press
2. Enter the date using the format
3. Press
e.g. 14:45 for 2.45pm.
4. Press
5. Press
NOTE
The date and time is retained during a power failure or when the batteries are discharged.
Set alarm
1. Press
2. Scroll
3. Scroll
4. If you select
2:45pm and press
5. Press
NOTE
Once the alarm is set to on, the
The alarm will ring at the medium level.

Set alarm melody

There are three alarm ringtones.
1. Press
Press
2. Scroll
-
3. Scroll
m d m
and scroll to CLOCK/ALARM. Press . Display shows
DD/MM e.g. 04/ 08 for 4th August.
m
and enter the time using the 24 hour format HH:MM,
m
to confirm.
>
to return to standby.
m d m
, scroll to CLOCK/ALARM and press .
d m
to SET ALARM and press .
u d m
or to OFF, ON ONCE or ON DAILY and press .
ON ONCE or ON DAILY, enter the time using the 24 hour format
m
.
>
to return to standby. When the alarm goes off, press any key to stop the ring.
icon is displayed.
ALARM ON and the
m d
and scroll to CLOCK/ALARM.
m
.
d m
to ALARM TONE and press .
Melodies are played.
u d m
or and press .
m
DATE & TIME, then press .
HH - MM e.g 14:45 for
will flash on the display.
Clock & Alarm