J.P. SELECTA RE-610 Manual De Instrucciones página 41

2.2.2 Stirring paddle installation
Four plum knobs loose to the bolts can be flat, remove the upper tray (7), tray gasket, reactor lid (6) and reactor lid
openings sealing gasket. Place the stirring paddle (11) in the vessel body. Coated vacuum grease on the contact surface of
the vessel body and the reactor lid. Install the reactor openings sealing gasket, reactor lid (6), tray gasket (7) and upper tray
(7) in turn, tighten the plum knob.
Note: Please refer to 1.4 for the mounting position of the reactor lid.
Figure 2.2.2 Stirring paddle installation
6 Reactor lid 7 Upper tray 11 Stirring paddle
41