Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Carefully blow
away debris.
Remove Towers and
assemble Landing Pads.
• Attach rubber pads.
Bolt
Metal
washer
Screw bolt into fastener.
Do not fully tighten.
1033034B-3/12
Seal exposed
Make sure top of fastener is
metal with
flush with rooftop.
touch-up paint.
Insert assembled Landing Pads
into fasteners.
Attach Control Towers and
finish tightening bolts.
Apply a silicone
bead over the holes.
Note: Orient fasteners to
avoid obstructions.
Push down and fully
tighten Towers.
" S N A P "
WARNING: Direct contact of
uncured sealant irritates
eyes and may irritate skin.
Overexposure to vapor may
irritate eyes, nose and
throat. Avoid eye and skin
contact. Use with adequate
ventilation. Do not handle
contact lenses with sealant
on hands. In case of eye
contact, flush with water for
15 minutes. Obtain medical
attention. In case of skin
contact, remove from skin
and flush with water. Sealant
releases acetic acid
(vinegar-like odor) during
cure.
Firmly close covers
until both sides snap.
Publicidad
Tabla de contenido
