Mopar 82212422 Instrucciones De Montaje página 7

26. Position the kit supplied grille surround and align the
eight mounting tabs (1) into their prospective slots.
Using hand pressure on the outside of the grille
surround and inside the fascia, push together firmly
to seat each mounting tab. Start in one corner and
work in a clockwise motion. A click/snap sound is
normal when installing.
27. Look from the rear of the fascia, inspect and verify that
all mounting tabs (1) are seated properly.
28. Position the grille surround to the previously removed
grille texture and align the sixteen mounting tabs (2).
Using hand pressure on the outside of the grille sur­
round and inside the grille texture, push together firmly
to seat each mounting tab (2). A click/snap sound is
normal when installing.
29. Look from the rear of the fascia, inspect and verify that
all mounting tabs (2) are seated properly.
30. Install the grille texture retaining screws (1). Tighten
the fasteners securely.
31. Position the lower inner fascia support (2) and install
the three fasteners (1). Tighten the fasteners securely.
32. If equipped, attach the adaptive cruise control harness
to the lower inner fascia support.
Sep 19, 2011
7
K6861077