Publicidad
Idiomas disponibles
Idiomas disponibles
EN
FR
DE ES
Your
hedge
trimmer
manufactured to greenworks tools's high standard for
dependability, ease of operation, and operator safety.
When properly cared for, it will give you years of rugged,
trouble-free performance.
rules for safe operation
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
intenDeD use
This hedge trimmer is intended for cut ing and trimming
hedges and bushes in domestic use. It is not intended to
be used for cutting above shoulder level.
„ Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
WorK area safetY
„ Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
„ Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
„ Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
eleCtriCal safetY
„ Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
personal safetY
„ Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
opera ing power tools may result in serious personal
injury.
„ Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
gloves, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
IT
PT
NL
SV DA NO
English (Original instructions)
has
been
engineered
WarninG
FI
HU CS RU RO PL
and
„ Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energizing
power tools that have the switch on invites accidents.
„ Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
„ Do not over-reach. Keep proper footing and balance at
all times. This enables better control of the power tool
in unexpected situations.
„ Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
poWer tool use anD Care
„ Do not use any abrasive wheels. Do not force the power
tool. Use the correct power tool for your application.
The correct power tool will do he job better and safer
at the rate for which it was designed.
„ Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
„ Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in he hands of untrained users.
„ Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
„ Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
„ Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
BatterY tool use anD Care
„ Ensure the switch is in the off position before inserting
battery pack. Inserting the battery pack into power tools
that have the switch on invites accidents.
„ Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
„ Use power tools only with specifically designated
10
SL HR ET
LT
LV SK BG
Publicidad
