Suntec Wellness Klimatronic ENERGIC 9.0 + Manual Del Usuario página 17

4. Turn the extract air hose in the direction of the arrow (1) displayed and remove it from the ENERGIC
unit.
5. Turn the extract air hose in the direction of the arrow (2) displayed and connect it to the ENERGIC
unit.
6. Plug the power plug into a socket. Never pull the plug out of the socket with force using the
connection line. This can damage the power cable.
7. Since the ENERGIC unit emits hot air, please observe a sufficient minimum safety distance to each
wall. (Fig. 1)
8. Despite the splash water protection, you should not operate the ENERGIC unit in moist areas, such
as e.g. swimming baths or similar areas.
9. The colour of the ENERGIC unit can change slightly due to direct solar radiation.
10. The ENERGIC unit is equipped with a special thermal deactivation. This protects the unit from
overheating in extreme ambient conditions.
11. Please place the ENERGIC unit so that the air inlet is not impeded, e.g. by furniture or curtains, since
this can negatively effect the capacity.
12. Do not allow direct sunlight to shine on the ENERGIC unit, since it may then overheat and
automatically deactivate on account of the thermal deactivation.
NAME OF THE COMPONENTS
1. Operating panel
2. Control lamp
3. Air outlet grid
4. Wall adapter
5. Air hose
6. Upper condensation water outlet with rubber plug
Carrier handles
7.
8. Air hose connection piece
9. Activated carbon filter top
10. Coarse filter top
11. Filter grid
12. Coarse filter bottom
13. Lower condensation water outlet with rubber plug
17