Suntec Wellness Klimatronic ENERGIC 9.0 + Manual Del Usuario página 23

deactivates.
How is the m² or
m³ data of the
manufacturer
calculated
ENERGIC unit
does not cool
correctly
E1
E2
E4
DF
SPARE PARTS AND ACCESSORIES SUPPLY (FAST CONVENIENT SUPPLY)
You can obtain spare parts and accessories for your ENERGIC unit from your local dealer. And at
our website
you will find further information on individual accessory products as well as information on
obtaining our spare parts quickly and conveniently.
You will also find other information (e.g. FAQ, lists of spare parts, document download, etc) about
your ENERGIC unit.
Name
EAN
Room temperature
outside the function
range:
Room temperature inside
the function range:
Temperature of the
cooling agent lines too
high or too low
Water tank full
De-icing mode
www.suntec-wellness.de
Description
ENERGIC unit switches off automatically. Check
manual setting of the required temperature as well
as the TIMER setting.
The m² or m³ data of the manufacturer for the
various ENERGIC units are average values related
to a room height of 2.5 metres. It must be
considered that such data can be clearly
underscored or exceeded under certain
circumstances. Circumstances which work against
efficiency of the ENERGIC units include e.g. bad
insulation of the building, large window areas,
south facing, attic apartment, many additional heat
sources, such as e.g. number of persons, EDP,
light, kitchen units, washing units etc.
You achieve the most effective and economical
cooling comfort if you already cool the room to be
cooled when the room temperature is not yet
heated up. Air conditioners operate more
effectively if the temperature is to be maintained.
To drastically cool the air and inventory in a fully
heated room requires much more time and energy.
Observe all data in these operating instructions
concerning function range.
Temporary error of start temperature. Please
switch the ENERGIC unit off and start it again after
approx. 30 minutes. If the error occurs
continuously, the ENERGIC unit requires specialist
inspection.
Temporary error on measuring output temperature.
Please switch the ENERGIC unit off and start it
again after approx. 30 minutes. If the error occurs
continuously, the ENERGIC unit requires specialist
inspection.
If the water tank is full, the warning sign "E4"
appears in the display. To restart operation of the
ENERGIC unit, please remove the plug of the
condensation water outlet to allow water to leak
out. Please use an appropriate collection tank.
When the water has been completely removed,
please start the TRANSPORT unit again. The
ENERGIC unit can now be used as usual.
This procedure is completely normal and protects
the system from icing and failure. The unit starts
automatically after approx. 15 minutes again
(depending on the function setting). This
procedure repeats itself regularly.
Functional drawing
23